Thermal insulation to improve the comfort of occupied spaces above carparks.
Mammoth carpark panel insulation is designed to improve the thermal performance of concrete carpark ceilings where there are residential and commercial buildings above.
Designed to be fitted to concrete soffits/slabs, Mammoth® carpark panel insulation enhances the comfort and energy efficiency of buildings above carparks.
Mammoth carpark panels contour over uneven textures which are common place in concrete form work. The airlay manufacture of Mammoth Carpark Panels helps the insulation achieve a seamless fit that supports higher thermal performance across the system by preventing air movement between the insulation panel and the substrate.
Mammoth carpark panel insulation complies with provisions of the New Zealand Building Code (NZBC): AS/NZS 4859.1 for thermal performance and ISO 9705 for the material Group Number 1S for fire performance.
Mammoth carpark panel insulation is designed to improve the thermal performance of concrete carpark ceilings where there are residential and commercial buildings above.
Designed to be fitted to concrete soffits/slabs, Mammoth® carpark panel insulation enhances the comfort and energy efficiency of buildings above carparks.
Mammoth carpark panels contour over uneven textures which are common place in concrete form work. The airlay manufacture of Mammoth Carpark Panels helps the insulation achieve a seamless fit that supports higher thermal performance across the system by preventing air movement between the insulation panel and the substrate.
Mammoth carpark panel insulation complies with provisions of the New Zealand Building Code (NZBC): AS/NZS 4859.1 for thermal performance and ISO 9705 for the material Group Number 1S for fire performance.
| PRODUCT RANGE | PACK SIZES | |||||||
|---|---|---|---|---|---|---|---|---|
| Colour | Density (kg/m3) | NRC | R-Value | Nominal Thickness (mm) | Dimensions (mm) | Pieces per pack | Area per pack (m2) | |
| Carpark Panel | Mottled Grey | 28.57 | 0.85 | R 1.7 | 70 | 2400 x 1200 | 4 | 11.52 |
| Mottled Grey | 32.00 | R 2.5* | 100 | 2400 x 1200 | 3 | 8.64 |
* Minimum order quantities (MOQs) apply.
| Technical Attributes | Standard | Test Result |
|---|---|---|
| Performance | ||
 Thermal Performance |
ASTM C518 | As shown on Product Range Table |
| Acoustic Performance |
ISO 354 | As shown on Product Range Table |
| Product Safety | ||
| Non Toxic |
OSH Health and Safety Guidelines1 | Polyester products are ‘non-toxic’ |
| Non Irritant |
OSH Health and Safety Guidelines1 | Polyester products are ‘non-irritant’ |
| Respiratory Safe |
n/a | Polyester fibres are non-respirable |
| Fire Test |
ISO9705 | Group 1S |
| AS/NZS60695.2.11 | Passed - Glow wire flammability test | |
| AS/NZS60695.11.5 | Passed - Test flames (Needle-flame test) | |
| VOC Emission Safe2 |
Total VOC ≤ 0.5mg/m3 | < 0.005mg/m3 - level below detection4 |
| Formaldehyde ≤ 0.06mg/m3 | < 0.009mg/m3 - level below detection | |
| Glue Free |
Free from all glues and chemical binders | |
| Other | ||
| Non Corrosive |
AS/NZS4859.1 | Materials composed entirely of polyester are regarded as non-corrosive and are exempt from testing. Alkalinity of pH 7.8. |
| Vermin Resistant |
Not a food source for vermin (and not treated) | |
1 Occupational Safety and Health Service. Health and Safety Guidelines for the Selection and Safe Handling of Synthetic Mineral Fibres. Dept,of Labour, 1994, p18.
2 Another Mammoth product with a similar nominal weight and fibre composition was tested to ASTM D5116 and classed as low VOC emitting.
3 All individual VOCs were less than their threshold limit values. Carcinogens and reproductive toxins were not identified as part of the VOCs
| PRODUCT RANGE | PACK SIZES | |||||||
|---|---|---|---|---|---|---|---|---|
| Colour | Density (kg/m3) | NRC | R-Value | Nominal Thickness (mm) | Dimensions (mm) | Pieces per pack | Area per pack (m2) | |
| Carpark Panel | Mottled Grey | 28.57 | 0.85 | R 1.7 | 70 | 2400 x 1200 | 4 | 11.52 |
| Mottled Grey | 32.00 | R 2.5* | 100 | 2400 x 1200 | 3 | 8.64 |
* Minimum order quantities (MOQs) apply.
| Technical Attributes | Standard | Test Result |
|---|---|---|
| Performance | ||
| Thermal Performance |
ASTM C518 | As shown on Product Range Table |
| Acoustic Performance |
ISO 354 | As shown on Product Range Table |
| Product Safety | ||
| Non Toxic |
OSH Health and Safety Guidelines1 | Polyester products are ‘non-toxic’ |
| Non Irritant |
OSH Health and Safety Guidelines1 | Polyester products are ‘non-irritant’ |
| Respiratory Safe |
n/a | Polyester fibres are non-respirable |
| Fire Test |
ISO9705 | Group 1S |
| AS/NZS60695.2.11 | Passed - Glow wire flammability test | |
| AS/NZS60695.11.5 | Passed - Test flames (Needle-flame test) | |
| VOC Emission Safe2 |
Total VOC ≤ 0.5mg/m3 | < 0.005mg/m3 - level below detection4 |
| Formaldehyde ≤ 0.06mg/m3 | < 0.009mg/m3 - level below detection | |
| Glue Free |
Free from all glues and chemical binders | |
| Other | ||
| Non Corrosive |
AS/NZS4859.1 | Materials composed entirely of polyester are regarded as non-corrosive and are exempt from testing. Alkalinity of pH 7.8. |
| Vermin Resistant |
Not a food source for vermin (and not treated) | |
1 Occupational Safety and Health Service. Health and Safety Guidelines for the Selection and Safe Handling of Synthetic Mineral Fibres. Dept,of Labour, 1994, p18.
2 Another Mammoth product with a similar nominal weight and fibre composition was tested to ASTM D5116 and classed as low VOC emitting.
3 All individual VOCs were less than their threshold limit values. Carcinogens and reproductive toxins were not identified as part of the VOCs
Installation
Mammoth Carpark Panel must be installed according to the manufacturer’s guidelines. Installation Instructions for can be found at www.mammoth.co.nz/downloads Contact us on 0800 MAMMOTH for more details.
50 Year Warranty
Mammoth Insulation has a 50 year warranty. Our product warranty covers that - so long as the insulation is installed correctly and remains adequately protected - Mammoth insulation will perform for 50 years. The warranty applies only to 100% polyester insulation products manufactured by InZone Industries Ltd and not to other composite products manufactured by InZone Industries Ltd. Read the full warranty at www.mammoth.co.nz for terms and conditions.
Mammoth Carpark Panel insulation is easy to cut with a specialised insulation saw such as Bacho or Tajima knife.
The recommended tools for fitting Mammoth Carpark Insulation Panels is an automated fastening tool such as Ramset Gas technology tool or a Hilti gun. You can download our Installation Guidelines above.
Mammoth® Modern Insulation
Manufactured by InZone Industries Ltd
PO Box 204 289
Highbrook
Auckland 2161
New Zealand
Email:
info@mammoth.co.nz
Call Us:
0800 MAMMOTH
(0800 626 668)
• Send us a
Tweet
• Join us on
Facebook
• Follow us on
Instagram
• Follow us on
LinkedIn
Meet a Mammoth Insulation Trade Rep or Get Support
